118 Helpline

How to Reduce Your Electricity Bill in Pakistan — 15 Practical Ways

Practical, no-nonsense ways to cut your Pakistan electricity bill: slabs, peak hours, AC, fridge, geyser, meter readings, and why paying on time matters.

1. Know your slab — the biggest saving is staying under 200, 300 or 500 units

Pakistan's tariff is progressive: the first 100 units are Rs 22.44, the next 100 are Rs 28.91, then Rs 33.10, Rs 36.46 and so on (unprotected, Feb 2026 base rates). Crossing a slab boundary raises the rate for the next units, not for all units — but crossing 200 units can also cost you protected status. If you are near a boundary, saving 10–20 units can save more than the units themselves.

2. Shift heavy loads out of peak hours — only if you have a TOU meter

If your tariff code ends in “T”, peak hours (seasonal: Dec–Feb 5–9 pm, Mar–May 6–10 pm, Jun–Aug 7–11 pm, Sep–Nov 6–10 pm) cost about Rs 46.85 per unit versus Rs 34.53 off-peak. Run the water pump, washing machine and iron in the morning or late night. If you are on flat A-1, peak hours do not change your total — do not pay for a TOU switch you do not need.

3. AC: 26°C, clean filter, and do not cool an empty room

An air conditioner is usually the largest single load in summer. Setting 24°C instead of 26°C can add hundreds of units over a summer. Clean the filter every two weeks, close doors, and use a fan with the AC so the thermostat can stay higher.

4. Fridge, geyser, iron, and water pump — the hidden loads

An old fridge with a broken door seal, a geyser left on all day, and an iron used in many short sessions all add units silently. Turn the geyser on 30 minutes before use and off after, iron clothes in one session, and fix fridge seals.

5. LED lights, inverter fans, and standby power

Replace old bulbs with LEDs, use inverter fans where possible, and switch off standby devices (TV, set-top box, chargers) at the socket. Standby power is small per device, but it runs 24 hours a day.

6. Check your meter reading every month

Compare the present reading on your bill with your actual meter. If the bill shows an estimated reading, or a reading far above your meter, photograph the meter and complain before the due date. An estimated bill can push you into a higher slab for no reason.

7. Solar is not a bill eraser — understand net metering

Solar exports happen in daylight (off-peak), while evening imports on a TOU meter are billed at peak rates. Size a system for your daytime load, and do not assume every exported unit cancels an evening unit at the same price.

8. Pay on time, every time

Late payment surcharge and arrears compound. Paying within the due date is the cheapest “saving” available — it costs nothing to do and avoids a surcharge on the next bill.

FAQs

What is the fastest way to reduce my electricity bill?

Find your slab and stay under the next boundary if you are close to it, and check that your meter reading is actual, not estimated.

Do peak hours matter for every home?

No. Only TOU meter customers pay separate peak rates. Most homes on flat A-1 do not.

Is solar worth it?

It can be, if sized for daytime load and if you understand net metering — daytime exports are off-peak, evening imports can be peak.

← Back to all companies · Bill calculator